243. Projection of Images (Basic Operation)3-4. Adjusting the position and the size of projected screen3-4-1. Displaying the test pattern1 Press the TEST button on the remote control. Alternatively, select the test pattern from the signalselection button.If you register the test patterns to the signal selection buttons (<1> to <8> buttons), select the test pattern according to“3-3. Selecting the title of input signal (See page 23)”.The mode for selecting the test pattern is set.2 Press the SELECT / button.The display of the test pattern name on the LCD switches.3 Display on the LCD the name of the test pattern to be projected, then press the ENTER button.The test pattern is displayed.• To cancel the test pattern display, reselect the signal to be project.3-4-2. Adjusting the position of the projected screen (Lens shift)1 Press the [LENS CTL] UP/DOWN/LEFT/RIGHT buttons while depressing the CTL (LENS) button,on the control panel of your projector as required.The position of the projected screen will move upward, downward, left or right.• When controlling with the remote control, press the POSI/LENS button while depressing the CTL button.
