10Connecting to the AerialRemove the aerial cable plug from your TV set andinsert it into the aerial socket at the back of therecorder. Plug one end of the aerial cable into the TVsocket on the recorder and the other end into theaerial input socket on your TV set.RF coaxial connectionConnect the RF. OUT jack on the recorder to theaerial input jack on the TV using the 75-ohm CoaxialCable supplied (R). The RF. OUT jack passes thesignal through from the AERIAL jack.ANTENNAINPUTAerialRear of the recorderRear of TVL RAUDIO INPUT VIDEOINPUTRa AERIALConnect the aerial to this terminal.b AV OUT (VIDEO / AUDIO OUT (Left/Right))Connect to a TV with video/audio inputs.c AV IN 1 (VIDEO IN/AUDIO IN (Left/Right))Connect the audio/video output of an externalsource (Audio system, TV/ Monitor, VCR,Camcorder, etc.).d COAXIAL (Digital audio out jack)Connect to digital (coaxial) audio equipment.e OPTICAL (Digital audio out jack)Connect to digital (optical) audio equipment.f Cooling fang AC Power CordPlug into the power source.h RF. OUTPasses the signal from the AERIAL to yourTV/monitori S-VIDEO OUTConnect to a S-Video Input on TV.j COMPONENT/PROGRESSIVE SCAN VIDEOOUT (Y Pb Pr)Connect to a TV with Y Pb Pr inputs.Rear PanelHookup and Settingsa b c d e f gh i j