CHAPTER 1 GENERAL INFORMATION– 23 – NWA-008841-001 Rev.5.090ch1001.fmApplication Processor CardThis table shows the names and functions of each application processor card.NOTE: PN-AP01 (AP01) card and PN-CC01 (ETHER) card cannot be mounted in NEAX 2000 IPS.Application Processor Card Name and FunctionContinued on next pageEQUIPMENTNAMEFUNCTIONALNAME FUNCTIONPN-AP00-B[For PCS]DBM Data Base Module Card for WCS Roaming functionOne card per system.Supports number extension of PS.[Series 3400 software required]PN-AP00-B AP00 Application Processor CardProvides four RS-232C ports, and is used for SMDR, HotelPrinter, CIS, PMS, MCI functions.(For PMS function, PN-AP00-B with MRCA program is notavailable.)One card per system.PN-AP00-D AP00 Application Processor CardProvides four RS-232C ports, and is used for SMDR, HotelPrinter, CIS, MCI functions.One card per system.PN-BRTA BRT 1-line Basic Rate (2B+D) Interface Trunk CardAccommodates one 2-channel PCM digital lines.PN-2BRTC BRT 2-line Basic Rate (2B+D) Interface Trunk CardAccommodates two 2-channel PCM digital lines.PN-2BRTK[For UK]BRT 2-line Basic Rate (2B+D) Interface Trunk CardAccommodates two 2-channel PCM digital lines.PN-4BRTA-A BRT 4-line Basic Rate (2B+D) Interface Trunk CardAccommodates four 2-channel PCM digital lines.PN-24CCTA CCT CCIS (1.5 Mbps) Trunk CardProvides a built-in Common Channel Handler (CCH) of No.7CCIS.JULY/1/2006EQUIPMENT NAME AND FUNCTION
