CHAPTER 1 GENERAL INFORMATION– 45 – NWA-008841-001 Rev.5.090ch1001.fmMOUNTING CONDITIONS OF CIRCUIT CARDSThis section explains the conditions for mounting circuit cards used in the system.Circuit Card Mounting Slots(1) Regular PIMCircuit Card Mounting Slots*1 PN-CP24-A/CP24-B/CP24-C/CP24-D (MP) card is to be mounted in the MP12 slot of PIM0.PZ-M606-A (ETHER) card is to be mounted on the PN-CP24-A/CP24-B/CP24-C/CP24-D (MP)card.PN-CP15 (FP) card is to be mounted in the FP12 slot of PIM2, 4, 6 according to the system con-figuration.LT00-LT11 : Line/Trunk card mounting slotsAP00-AP11 : Application Processor cardmounting slotsMP12 : PN-CP24-A/CP24-B/CP24-C/CP24-Dmounting slotFP12 : PN-CP15 mounting slotVM : PZ-VM00/VM00-M/VM03-M/VM10-M mounting slotPFT : PZ-8PFTB mounting slotAC/DC PWR : PZ-PW121/PW126 mounting slotWhen using the A361 PIM-DC (PIM for –48 VDC power supply system), this slot is used forDC/DC PWR (PZ-PW135 mounting slot).DC/DC PWR : PZ-PW122 mounting slotWhen using the A361 PIM-DC (PIM for –48 VDC power supply system), this slot is not used.LT09/AP09LT08/AP08LT07/AP07LTC1LTC0 LTC2BWBFRONTAC/DCPWRLT10/AP10LT00/AP00LT01/AP01LT02/AP02LT03/AP03LT04/AP04LT05/AP05LT06/AP06LT11/AP11MP12/FP12LTC3DC/DCPWRPFTVM* 2 * 1PIM0 - 7 *3JULY/1/2006MOUNTING CONDITIONS OF CIRCUIT CARDS
