NEC NEAX 2000 IPS Manual

Also see for UNIVERGE NEAX 2000 IPS: Installation guide User guide User guide User guide Reference guide

Contents

NEC NEAX 2000 IPS Manual Manual pdf 97 page image

CHAPTER 3 SYSTEM DATA PROGRAMMING– 87 – NWA-008855-001 Rev.1.0avch3001.fmPRECAUTIONSSystem Data BackupCAUTION• If you operate the following without system data backup after system data setting or servicememory setting (registration of the features such as “Call Forwarding” and “Speed Calling[Speed Dialing]” from a station), the data has been set is invalid.You must execute the system data backup before the following operations.-Turning Off the system-System Initial (reset of MP card)-Changing the MP card to Off-Line Mode-Changing the MP card to On-Line Mode after system data setting under Off-Line Mode• You can execute the system data backup by the following two ways.-Executing the system data backup once a day at the time set by CM43 Y=5>00(If no data is set, the default setting is 3:00 a.m.)-Executing the system data backup from MAT/CAT by CMEC Y=6>0:0• Do not reset the MP card, while “SYSD” lamp on the MP card is flashing.PRECAUTIONS