NEAX 2000 IPS Request for Proposal (RFP) Reference Guide Page 8- 1NDA-24349, Issue 4Chapter 8 System AdministrationSystem AdministrationIn this system, the Customer Administration Terminal (CAT) or Maintenance AdministrationTerminal (MAT) is used for programming the system data. The CAT is a digital multi-functiontelephone (Dterm ) which is equipped with function keys, a dial pad and LCD and interfaces withthe system via the MP card. The Maintenance Administration Terminal (MAT) is a personalcomputer that provides an interface to the PBX via the system CPU card. The MAT PC musthave the MATWorXTM program properly installed to communicate with the PBX. MATWorX isrequired for system software registration and activation.Password EntryIn a system with password service, a maintenance person is required to enter an authorizationlevel number (Password Level) and appropriate password prior to engaging in programmingthe system data with the MAT/CAT. A maximum of eight (8) Password Levels can be set up.The number of commands that the maintenance person can access is determined by thePassword Level.Resident System ProgramThis resident system program generates system data automatically according to the systemhardware configuration, thereby providing immediate operation and shorter programming time.When activated, the system scans hardware configuration (such as line/trunk card location)and assigns the system data (such as station numbers, trunk numbers, etc.) according to apredetermined generic program assignment.Service Conditions This service is applicable for equipment installed in PIM0 through PIM3. Data for any vacant slot is not assigned. Virtual stations are not assigned. A line/trunk card (PN-AUCA/PN-DK00/PN-CFTA/PN-CFTB/PN-2AMP/PN-4DAT/PN-4RSTF/PN-4VCTI/PN-32IPLA) is not assigned, even if mounted. An application card is not assigned, even if mounted. No tenant assignment is provided. (Tenant 01 is assigned)
