746.5 Addition of Cache MemoryCAUTION Save the product in an area where high temperature do not occur and thedifference between the high and low temperatures is not large. Do notsave the product in a place with high humidity and/or much dust. Save the product into the package during storage or shipment. Note that foreign substances such as water and metal may not be enteredinto the product during storage. Failure to follow it may cause devicefailure, electric shock, and/or fire to occur. Do not make terminals on connectors short circuited. Do not pour water orliquid on terminals. Failure to follow it may cause device fault or electricshock to occur. Note that your fingers may not be caught or hit on some object when yourhands are entered into the disk array unit. Do not disassemble or modify the cache memory. Failure to follow it maycause the unit to be defected.The disk array unit is normally equipped with a single 256MB cache memory on eachcontroller.To use an additional control card or to use larger capacity of cache memory for improvingthe feature of the disk array unit, up to four cache memories can be added for eachcontroller and additional control card.Product name: Additional 512MB cache memory Part number: NF2300-SC01EProduct name: Additional 1GB cache memory Part number: NF2300-SC02E Cache memories with different capacities may coexist in a specificcontroller. However, The cache memory installed on a slot, one of CHE0to CHE3, of CONT0 must have the same capacity as that on thecorresponding slot of CONT1. The additional control cards installed in CONT0 must have cachememories with the same capacities as those installed in CONT1 at thecorresponding slots (CHE4 to CHE7). However, their locations andcapacities may not be the same as those of the cache memories in thecontroller. Install cache memories on the slots sequentially in the ascending order ofslot numbers if they are installed.NF2300-SC01E and NF2300-SC02E are composed of two 256MB cache memory cardsand two 512MB cache memory cards, respectively. Install a single cache memory card foreach of two controllers or two additional controllers.