1015. Using On-Screen Menu Menu Descriptions & Functions [INFO.]Displays the status of the current signal and lamp usage. This item has six pages. The information included is asfollows:TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.[USAGE TIME][LAMP LIFE REMAINING] (%)*[LAMP HOURS USED] (H)[FILTER HOURS USED] (H)[TOTAL CARBON SAVINGS] (kg-CO2)* The progress indicator shows the percentage of remaining bulb life.The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFEREMAINING bar indicator changes from 0% to 100 Hours and starts counting down.If the remaining lamp time reaches 0 hours, the projector will not turn on.• The message to the effect that the lamp or the filters should be replaced will be displayed for one minute whenthe projector is turned on and when the POWER button on the projector or the remote control is pressed.To dismiss this message, press any button on the projector or the remote control.Lamp life(H)Replacement lamp ModelECO MODENORMAL(OFF or AUTO ECO)ECO(ECO1 or ECO2*)4000 5000 NP16LP P350X3000 3500 NP17LP P420X/P350W* [ECO2] is available on P350X only.• [TOTAL CARBON SAVINGS]This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving cal-culation is based on the OECD (2008 Edition). (→ page 29)
