NEC NP-VE281 User Manual
Also see for NP-VE281: Command guideSupplementary guideTechnical data sheetInstallation and assemblyInstallation and assembly
                                                                                        | |
Contents
| 
193. Projecting an Image (Basic Operation)Selecting a SourceSelecting the computer or video sourceNOTE: Turn on the computer or video source equipment connected to the projector.Selecting from Source ListPress and quickly release the SOURCE button on the projector cabinet to displaythe Source list. Each time the SOURCE button is pressed, the input source willchange as follows: “COMPUTER”, “VIDEO”, “HDMI”. To display the selectedsource, press the ENTER button or allow 2 seconds to elapse.Detecting the Signal AutomaticallyPress the SOURCE button once. The projector will search for the available inputsource and display it. The input source will change as follows:VE280X/VE280:COMPUTER → VIDEO → COMPUTER → ...VE281X/VE281/VE282X/VE282:COMPUTER → VIDEO → HDMI → COMPUTER → ...TIP: If no input signal is present, the input will be skipped.Using the Remote ControlVE280X/VE280: Press any one of the COMPUTER1 and VIDEO buttons.VE281X/VE281/VE282X/VE282: Press any one of the COMPUTER1, HDMIand VIDEO buttons.Selecting Default SourceYou can set a source as the default source so that it will be displayed each timethe projector is turned on.1. Press the MENU button.The menu will be displayed.2. Press the button twice to select [SETUP] and press the button orthe ENTER button to select [GENERAL].3. Press the button four times to select [OPTIONS(2)].4. Press the button five times to select [DEFAULT SOURCE SELECT] andpress the or button.5. Select a source as the default source.6. Press the EXIT button a few times to close the menu.7. Restart the projector.The source you selected in step 5 will be projected.TIP: When the projector is in Standby mode, applying a computer signal from a computerconnected to the COMPUTER IN input will power on the projector and simultaneouslyproject the computer’s image.[AUTO POWER ON(COMP.)](→ page 60)VE280X/VE280VE281X/VE281/VE282X/VE282 |
Related manuals for NEC NP-VE281
manualsdatabase
Your AI-powered manual search engine