435. Using On-Screen MenuUsing the MenusNOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.1. Press the MENU button on the remote control to display the menu.2. Press the buttons on the remote control to display the submenu.3. Press the ENTER or button on the remote control to highlight the top item or the first tab.4. Use the buttons on the remote control to select the item you want to adjust or set.You can use the buttons on the remote control to select the tab you want.5. Adjust the level or turn the selected item on or off by using the buttons on the remote control.Changes are stored until adjusted again.6. Repeat steps 2 -5 to adjust an additional item, or press the EXIT button on the remote control to quit themenu display.NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.7. Press the MENU button to close the menu.To return to the previous menu, press the EXIT button.
