34. Convenient FeaturesOFFVIDEOS-VIDEOVIEWERNETWORKCOMPUTERCOMPONENTONSELECTPOWERPOWERMENU31 2ENTEREXIT Getting Integrated HelpYou get the contents about Help in English, Germanand Japanese.1. Press the HELP button on the remote control.• When no menus appear, the “How to Use Help”screen will be displayed.• When menus appear, the screen will be displayed,explaining the function of a highlighted item.2. Use the SELECT or button to scroll the view-ing area.3. Press the EXIT button.• The Help will be closed.display help exit helpHELPLASER3D REFORMAUTO ADJ.ASPECTPICTUREPIC-MUTELAMP MODER-CLICKL-CLICKMOUSEFREEZEPIPVOLUME MAGNIFY PAGEUPDOWNNTEREXIT Changing Lamp ModeThe lamp life can be extended by using the Eco mode.To change to the [ECO] mode, do the following:1. Press the LAMP MODE button to display [LAMP MODE] screen.2. Use the SELECT or button to select [ECO] mode.3. Press the ENTER button.To cancel it, press the EXIT button.to change from [eCO] to [nOrMal], go back to step 2 and select [nOrMal]. re-peat step 3.LAMP MODELASER3D REFORMAUTO ADJ.ASPECTHELPPICTUREPIC-MUTER-CLICKL-CLICKMOUSEFREEZEPIPVOLUME MAGNIFY PAGEUPDOWNN TEREXITLamp Mode Description Status of LAMP indicatorNORMAL This is the Default setting(100% Brightness).OffECO Steady Green lightSelect this mode to increase the lamplife (approx. 80% Brightness (lightoutput) on NP3150/NP3151W andapprox. 88% Brightness (light output)on NP2150/NP1150)NOTE:• The projector is always in [NORMAL] for one minute after the lamp is turned on and while the POWER indicator is blinkinggreen. The lamp condition will not be affected even when [LAMP MODE] is changed.• After a lapse of one minute from when the projector displays a blue, black or logo screen, [LAMP MODE] will automaticallyswitch to [ECO].The projector will return to the [NORMAL] once a signal is accepted.
