786. Using On-Screen Menu[Video]Turning On/Off 3 Dimension Separation [3D Y/C Separation]This function turns on or off the 3 dimensional separation feature.Off ............................... Turns off the function.On Still ................. Recommended for a still image.Normal ............ The projector detects and corrects the image automatically.Movie .............. Recommended for a moving image.TIP:When the image is poor quality, turn on [3D Y/C Separation]. If there is still poor quality, try turning off [Deinterlace] or tryturning off [3D Y/C Separation] and select [Normal] in [Deinterlace].NOTE: This feature is available for NTSC3.58 of Video signal only.Setting Vertical Edges [Vertical Enhancer]This function enhances the vertical edges around objects in the image.NOTE: This function is not available for an RGB, HDTV and Component signal.Selecting Interlace or Deinterlace [Deinterlace]This function allows you to select between "Interlace" and "Deinterlace".Off ............................... Project the interlaced signal.On Still ................. Select when a still image is displayed. When this option is selected for a moving image, jitter or artifactscan be seen.Normal ............ The projector automatically determines a still or moving image to display a clear picture. If selecting[Normal] causes excess jitter or artifacts, select [Movie].Movie .............. Select when a moving image is displayed. This will eliminate jitter and artifacts in a moving image. Thisoption is available only for SDTV.
