NEC NP4000 Installation Manual

Also see for NP4000: Specifications User manual Control commands Control commands Placement recommendations guide

Contents

NEC NP4000 Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.NP4000 Installation GuideDesktop and Ceiling Mount v 1.4www.necdisplay.com NP4000 Page 1 of 8ContentsProduct Description, Lens Specs, Screen/Aspect RatioNotes and Formulas Pg 1Diagrams & Distance Charts; 4:3 Pg 216:9 Pg 3Lens Shift Adjustable Range Pg 4Cabinet Dimensions Pg 5Lens Dimensions Pg 6Ceiling Mount Dimensions Pg 7Input Panel and Control Codes Pg 8Product DescriptionType: 1 chip DLP Projector Dimensions: 19.88” (W) x 15.16” (H) x 8.23” (D)0.7 DMD Weight: 36.4 lbsResolution: 1024 x 768 (4:3) / 1024 x 576 (16:9) Brightness: NP4000 – 5200 ANSI LumensPowered: Lens Shift, Horizontal & Vertical /Zoom/ Focus BTU’s: 2027 BTU/hourFan Noise: 36 dB / 34dB @ 1 meter Power Consumption: 655W (max)Network ReadyLens SpecificationsNP06FL: Throw Ratio: ~ 0.77:1 Focal Length: 11.4mm NP09ZL: Throw Ratio: ~2.22 - 4.43:1 Focal Length: 32.0 – 63.0mmScreen Sizes: 50”-200” F/#:2.0 Screen Sizes: 40” - 500” F/#:2.1 – 2.9_____________NP07ZL: Throw Ratio: ~1.33 - 1.79:1 Focal Length: 19.3 - 25.8mm NP10ZL: Throw Ratio: 4.43 -8.3:1 Focal Length: 48.8 - 77.6mmScreen Sizes: 40” - 500” F/#:1.8 – 2.3 _________ Screen Sizes: 40” - 500” F/#:2.2 – 3.1 ________ _NP08ZL: Throw Ratio: ~1.78 - 2.35:1 Focal Length: 26.0 - 34.0mmScreen Sizes: 40” – 500 ” F/#:1.7 – 1.9Screen/Aspect RatioBoth 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developedscaling technology. Menu selections have aspect ratio control for each source type.Notes For screen sizes not indicated on the projection tables, use the formulas below.If the figures on the tables do not match the results of formulas, use the figures in the table.• All calculations are based on 4:3 aspect ratio.• Distances are in inches, for millimeters multiply by 25.4.• Distances may vary ±5%.FormulasThe Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image sizevaries. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below tocalculate all screen dimensions. Plug in the image width for “W” in the Projection Formulas.Refer to the diagrams and charts for popular screen sizes on page 2 and 3:Projection Formulas: Definitions:NP06FL: C = 0.808W – 1.654 W = Image WidthNP07ZL: C(Wide) = 1.361W – 1.850 --------- C(Tele) = 1.831W – 1.811 H = Image Height (size)NP08ZL: C(Wide) = 1.823W – 2.520 --------- C(Tele) = 2.403W – 2.441 C = Throw distanceNP09ZL: C(Wide) = 2.298W – 4.134 --------- C(Tele) = 4.579W – 4.213NP10ZL: C(Wide) = 4.516W – 5.315 --------- C(Tele) = 8.514W – 5.512 4:3 Screen Formulas:W = H x 4/3H = W x 3/4Diagonal = W x 5/416:9 Screen Formulas:W = H x 16/9Note: Tilting the front of the projector from level up or down by H = W x 9/16more than 45° could reduce lamp life up to 20%. Screen Diagonal = W x 18.358/16