NEC NVM-2000 Replacement Instructions Manual

Also see for NVM-2000: User guide Installation guide Installation manual Manual Manual

Contents

NEC NVM-2000 Replacement Instructions Manual Manual pdf 10 page image

Replacing the Hard Drive in the NVM-20006Install the Replacement Hard DriveTo install the replacement hard drive:1. Carefully slide the replacement hard drive into the cage assembly.Be sure to line up the screw holes on the hard drive with the screwslots on the cage assembly. See Figure 5.2. Secure the hard drive in place with the four screws (removed andretained in step 10 of Remove the Old Hard Drive). See Figure 5.3. Plug the ribbon cable and the power supply connector into the newhard drive. See Figure 5.Important: Be sure that the red stripe on the ribbon cable isclosest to the power supply connector wires.Figure 5