865. Installation and ConnectionsConnecting to a HDBaseT transmission device (sold commercially)HDBaseT is a connection standard for home appliances that is established by the HDBaseT Alliance.Use a LAN cable sold commercially to connect the Ethernet / HDBaseT port of the projector (RJ-45) to a HDBaseTtransmission device sold commercially.Control signals (serial and LAN) and remote control signals (IR commands) from an external device are only supportedwhen the projector’s power is turned on.Connection exampleEthernet/HDBaseTComputer (for control use) Computer (for output use)Example of a transmission deviceRemote controlHDMI output video deviceNOTE:• Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially).• The maximum transmission distance over the LAN cable is 100 m.• Please do not use other transmission devices between the projector and the HDBaseT transmission device. The picture qualitymay be deteriorated as a result.• This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially.
