202. P rojecting an Image ( B asic Operation)Adjusting the tilt (Tilt foot)Adjusting the left and right tilt.1. Turn the left and right tilt feet to adjust.The tilt feet lengthen and shorten when turned.The height of the projected image is adjusted by turning the leftand right tilt feet.If the projected image is tilted, turn one of the tilt feet to adjust theimage so that it is level.• If the projected image is distorted, see “6 Correcting KeystoneDistortion [KEYSTONE]” (→ page 21).• The tilt feet can be lengthened by a maximum of 20 mm.• The tilt feet can be used to tilt the projector by a maximum of4°.UpDownTilt footNOTE:• Do not lengthen the tilt feet any more than 20 mm/0.8". Doing so will make the tilt feet’s mount section unstable and could causethe tilt feet to come off the projector.• Do not use the tilt feet for any purpose other than adjusting the projector’s projection angle.Handling the tilt feet improperly, such as carrying the projector by grasping the tilt feet or hooking it onto a wall using the tilt feet,could damage the projector.
