NEC PG-6000 User Manual

Contents

NEC PG-6000 User Manual Manual pdf 2 page image

2INTRODUCTIONImportant SafeguardsThe following are important safety instructions designed to ensure the long life of yourprojector and to prevent fire and shock hazards. Be sure to read these safety instructionscarefully and follow all warnings given below.InstallationPlace the projector on a flat, level surface and in a dry area free from dust and moisture.Do not place the projector in direct sunlight, near stoves or other heat radiating appliances.Smoke, steam and exposure to direct sunlight could adversely affect the internal components.Avoid rough handling when moving your equipment as a strong shock could damageits internal components. If installing the projector on the ceiling, use only parts suppliedby the manufacturer. Observe all instructions and warnings.Power supplyThe PG-6000 and PG-9000 projector are designed to operate on 120V 60H2, and the PG-6000Gand PG-9000G are designed to operate on 220-240V 50Hz AC power supply.Make sure your local power supply matches these requirements before operation.Handle the power cord carefully and avoid excessive bending. A damaged cord maycause electric shock or fire. If the projector is not to be used for an extended period, removethe plug from the power outlet.CleaningUnplug the projector from the power outlet before cleaning.Clean the cabinet and front panel periodically with a soft cloth. If heavily stained, use amild detergent solution. Never use strong detergents or solvents such as alcohol or thinnerto clean your projector.Lens cleaning: Avoid touching the lens surfaces.Special coating is applied to the lens surfaces.Consult your dealer for lens cleaning.Fire and Shock PrecautionsAdequate ventilation must be provided to prevent heat build-up inside the projector. Makesure the ventilation holes are unobstructed.Keep the inside of the projector free from foreign objects, such as paper clips, nails, paper,etc. Do not attempt to retrieve such objects yourself or insert metal objects such as wireand screw-drivers inside the projector. If a hazardous object falls inside the projector,unplug it immediately and call a qualified electrical repairman for removal.Do not set liquids on top of the projector.