NEC PG-6000 User Manual

Contents

NEC PG-6000 User Manual Manual pdf 9 page image

10BASIC OPERATIONTo project the picture source, proceed as follows:1) Turn on the main power of the projector.• Press the POWER switch on the front terminal.2) Turn on the connected equipment’s power.3) Turn on the power.• Press the POWER ON button on the remote control or the POWER button on the rear panel.4) Select an input signal source by pressing one of the ten INPUT buttons on the remote control. You can alsoselect a signal from the “INPUT SELECT” list.• See page 20 “INPUT SELECTION” for more details.5) Adjust the picture and sound.• See pages 14 through 18 for more details.NOTE: The volume function works only with the ISS-6010/ISS-6010G.6) To turn off the power, press the POWER OFF button on the remote control or the POWER button on therear panel.7) Press the POWER switch on the front terminal to turn off the main power of the projector.8) Last, turn off the connected equipment power.Projecting the Picture