Configuring the System 3-35Note Some older software may not work in a Windows 98 or Windows2000 system configured for FAT 32.Note In Windows NT 4.0 systems, the Partition Information screendoes not appear. Instead, the FAT16 Partition warning appears. Thisscreen is described in the following paragraph.7. After you select the FAT type, a FAT 16 or FAT 32 Partition warningscreen appears indicating that the system is about to partition andformat your hard drive using the FDISK program. This warningscreen contains three options: Back, Exit, and Continue.8. Click Continue. The following takes place:! system performs FDISK using the FAT type selected! system reboots! partitions are formatted! OS and drivers load from the CD.The “Operating System Restore Completed” screen appears when allfiles have been restored.9. Remove the CD from the CD tray.10. Click OK to reboot.This completes the Custom Rebuild and Restore procedure.See “NEC Application and Driver CD” for instructions on installing anyof the applications or online documents, or to install device drivers thatdid not come with your system.Restore any application or driver that was not provided by NEC by usingthe vendor diskette(s) or CD-ROM(s) included in its original packaging.
