NEC POWERMATE PRO2180 - SERVICE MANUAL 1996 Service Manual

Contents

NEC POWERMATE PRO2180 - SERVICE MANUAL 1996 Service Manual Manual pdf 123 page image

3-34 Option InstallationReplacing the Front and Side PanelsReplace the front panel only after it has been removed in a 5 1/4-inch device installation.If you are installing a 5 1/4-inch device, see “Installing the 5 1/4-Inch Device.”1. Align the four front panel tabs with the holes in the front of the system unit.2. Evenly press the front panel into position until the tabs lock the panel in place.Figure Section 3-29 Aligning the Front Panel3. Replace the side panel and reinsert the screws to hold the side panel in place.4. Continue at step 8 of the “Installing the 5 1/4-Inch Device” procedure.ADDING EXTERNAL OPTIONSThe following subsections provide information about attaching peripherals to the externalconnectors on the system unit.n Parallel Printern Serial Devicesn SCSI Devices