NEC POWERMATE VE - SERVICE MANUAL 05-1996 Service Manual

Also see for PowerMate V100e: Service manual

Contents

NEC POWERMATE VE - SERVICE MANUAL 05-1996 Service Manual Manual pdf 52 page image

Setup and Operation 2-15Use the legend keys to make the selections and exit to the Main Menu. Use Table Section2-5 to select the boot options.Table Section 2-5 Boot ParametersParameters Options DescriptionSummary Screen Enabled (default)DisabledDisplays system configuration at the end of boot-up.Floppy Check Enabled (default)DisabledVerifies diskette type during boot-up. Disablingspeeds up boot time.Last Boot Fail 3 (default)User-selectable settingsDisabledSets the number of times for user to boot system.If system fails to boot on number of tries, the"Previous Boot Incomplete" message appears andthe system boots with default settings.The default setting, 3, give the user three tries toboot the system before the "Previous BootIncomplete" message" appears.NumlockSelect “Numlock” directly from the Main Menu summary window to display the KeyboardFeatures menu.Use the legend keys to make the selections and exit to the Main Menu. Use Table Section2-6 to configure the keyboard parameters.Table Section 2-6 Numlock ParametersParameters Options DescriptionNumlock Auto (default)OnOffOn or Off turns NumLock on or off at bootup. Autoturns NumLock on if it finds a numeric key pad.Keyboard Auto-Repeat rateFast (default)MediumSlowSets the delay time after the key is held downbefore it begins to repeat the keystroke.Keyboard Auto-Repeat delay1/4 sec1/2 sec (default)3/4 sec1 secKey Click EnabledDisabled (default)Turns audible key click on or off.