NEC POWERMATE VE - SERVICE MANUAL 05-1996 Service Manual

Also see for PowerMate V100e: Service manual

Contents

NEC POWERMATE VE - SERVICE MANUAL 05-1996 Service Manual Manual pdf 85 page image

3-24 Option InstallationFigure Section 3-27 Removing the 3 1/2-Inch Drive BracketInstalling the 3 1/2-Inch DriveInstall a hard disk drive into the drive bracket as follows.1. Remove the system unit cover as previously described.2. Remove the 3 1/2-inch drive bracket from the system unit (see “Removing the3 1/2-Inch Drive Bracket”).3. Follow the preinstallation instructions that come with the device, such as settingjumpers and switches.4. Insert the hard disk drive so that the connectors extend out of the bracket on thesame end as the standard diskette drive connectors.5. Align the holes in the hard disk drive with the holes in the bracket.6. Secure the device to the bracket with the four screws, two to a side, that comewith the device (see Figure Section 3-29).3 1/2-InchDrive BracketTabsTabScrewPowerSupply