3-36 Installing Options3 1/2-Inch Drive InstallationUse the following procedure to install a hard disk drive intothe drive bracket.1. Remove the system unit cover.2. Remove the 3 1/2-inch drive bracket from the systemunit (see “Removing the 3 1/2-Inch Drive Bracket”).3. Follow the preinstallation instructions that come with thedevice, such as setting jumpers and switches.4. Insert the hard disk drive so that the connectors extendout of the bracket on the same end as the standarddiskette drive connectors.5. Align the holes in the hard disk drive with the holes inthe bracket.6. Secure the device to the bracket with the four screws,two to a side, that come with the device.Securing a 3 1/2-inch drive
