NEC PROSERVA PH133 Description

Contents

Standard Server FeaturesTable 1-2 describes the server's standard features.Table 1-2. Standard Server FeaturesProServaPH SMP-2/133 HighAvailability SystemIntel Pentium 133-MHz 2-way SMP processor32-MB system memory1 MB synchronous secondary cache per processorIntel EtherExpress PRO/100B Adapter LAN boardTwo, 2-GB Fast/Wide SCSI-2 hard disks4X SCSI CD-ROM readerLANDesk Server Monitor Module2-channel PCI Raid Module3 1/2-inch diskette driveProServaPH SMP-4/133 NetworkReady SystemIntel Pentium 133-MHz quad-processors64-MB ECC system memory1-MB synchronous secondary cache per processorIntel EtherExpress PRO/100B Adapter LANOne, 2-GB Fast/Wide SCSI-2 hard disk4X SCSI CD-ROM reader3 1/2-inch diskette driveProServaPH SMP-4/133 HighAvailability SystemIntel Pentium 133-MHz quad-processors64-MB ECC system memory1-MB synchronous secondary cache per processorIntel EtherExpress PRO/100B Adapter LANTwo, 2-GB Fast/Wide SCSI-2 hard disks4X SCSI CD-ROM readerLANDesk Server Monitor Module2-channel PCI RAID Module3 1/2-inch diskette driveFeature DescriptionTwo-Segment PCIBusFully PCI 2.1 compliant bus performance at 33 MHz with abandwidth of up to 133 MB/second. The two 32-bit segmentsprovide maximum system performance.EISA Bus Fully EISA 3.12 compliant bus performance at 8.33 MHz with abandwidth of up to 33 MB/second.Single to 4-WayPentium ProcessorSupportTwo CPU module expansion slots support up to two CPU modules,each containing up to two Pentium processors. Dual/quadprocessing enhances system performance and enables symmetricmultiprocessing (SMP) on supported operating systems. OnboardL1 cache has 8K each for code and data.Advanced ProgrammableInterrupt Controller (APIC)APIC controls interrupt detection and notification, and isused in conjunction with SMP. Use of APIC reduces the loadon the system bus, as the APIC uses a serial bus to transmitand receive interrupts.