E-11Note:1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT.When LOOP OUT is ON, do not connect an OUTPUT signal from another unit, that will place an extraordinary load onthe other unit and may damage it.2. LOOP OUT can not be turned ON while signals are input to RGB1 terminal.3. LOOP OUT can be turned ON while signals are input to RGB1 terminal if the POWER is switched ON.Information• To loop signals out to another plasma display, set the LOOP OUT to ON.• To create a video wall, set the VIDEO WALL menu items properly.• To connect monitors, please use a 1~2m (3.3~6.6 feet) BNC cable (any commercially available cable).• If the image quality is poor, do not use the monitor’s out terminal. Use a distribution amplifier (any commerciallyavailable distribution amplifier) to connect the split signals to the respective monitor INPUT terminals.• Being used as a video wall function, maximaly 4-screen is rough-standard with lower than 1024768, 60Hzsignal.• A distribution amplifier is particularly recommended when using a 9-screen video wall.• From the second monitor onward, connections require a BNC-RCA conversion cable or connector, a mini D-Sub15 pin cable-BNC (5) cable or a conversion connector.Creating a video wallWith buit-in matrix display capability, you can create a 2×2 or 3×3 video wall.• Connect signal cables and remote cables as shown below.Video signal RGB/DVD/HD signalVIDEO(IN/OUT)VIDEO 1VIDEO 2VIDEO 3AUDIO 1 DVD 1R( MONO )LY IN OUTREMOTEBNC connectorRCA phono plugOUTVIDEO SignalININOUTRemotecontrolVIDEO SignalRemotecontrolRGB2 / DVD2 / HD2 RGB 1R/VDG/ B/HD (IN / OUT)Cr/Pr Y Cb/Pb IN OUTREMOTEBNC connectorRGB signal/DVD/HD signalINOUTINOUTRemotecontrolRGB signal/DVD/HD signalRemotecontrolCable ManagementUsing the cable-clamps provided with the plasma display,bundle at the back of the unit the signal and audio cablesconnected to the display.SPEAKERS MUSTHAVE MORE THAN7WATT RATINGIMPEDANCE 6 OHMRIGHT LEFTAC INBack of the unitmounting hooks/mounting holes(in three places)clampmounting hook cablesTo attach To detach1. 2.