NEC PlasmaSync 42VP4D User Manual

NEC PlasmaSync 42VP4D User Manual Manual pdf 28 page image

E-22Adjusting the colorsUse this procedure to adjust hue and color density for red,green, blue, yellow, magenta and cyan.Such adjustments will not affect the other colors.You can accentuate the green color of trees, the blue ofthe sky, etc.Example: Adjusting the color tune for blueSet “ADVANCED OSM” to “ON” in the MAIN MENU(1/2), then perform the following operations.Press the MENU/ENTER button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “PICTURE”, thenpress the MENU/ENTER button.The “PICTURE” screen appears.2. Use the and buttons to select “COLOR TUNE”,then press the MENU/ENTER button.The “COLOR TUNE” screen appears.3. Use the and buttons to select “BLUE”.4. Adjust using the and buttons.COLOR TUNEEXITREDGREENBLUEYELLOWMAGENTACYANRESET : OFFSEL. RETURNADJ.* If neither the or button is pressed within 5 seconds,the current selection is set and the previous screenreappears.To continue making other adjustments...Repeat from step 3.5. Once the setting is completed...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Information COLOR TUNE settingsRED ................ Makes red’s adjustmentGREEN ........... Makes green’s adjustmentBLUE ............... Makes blue’s adjustmentYELLOW ......... Makes yellow’s adjustmentMAGENTA ...... Makes magenta’s adjustmentCYAN .............. Makes cyan’s adjustmentRESET ............ Resets settings to the factory defaultvalue. Use and buttons to select“ON”, then press the MENU/ENTERbutton. Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.Audio Settings MenuAdjusting the treble, bass and left/rightbalance and audio input selectThe treble, bass and left/right balance can be adjusted tosuit your tastes.Example: Adjusting the bassPress the MENU/ENTER button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “AUDIO”, thenpress the MENU/ENTER button.The “AUDIO” screen appears.2. To adjust the bass ...Use the and buttons to select “BASS”.3. Adjust the bass using the and buttons.AUDIOEXITBASSTREBLEBALANCEAUDIO INPUT1AUDIO INPUT2AUDIO INPUT3: VIDEO1: HD/DVD1: RGB1SEL. RETURNADJ.To continue adjusting the audio ...Repeat from step 2.4. Once the adjustment is completed ...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Note : If “CAN NOT ADJUST” appears...Set “AUDIO INPUT” on the AUDIO menu correctly.Information Audio settings menuBASS .............. Controls the level of low frequencysound.TREBLE .......... Controls the level of high frequencysound.BALANCE ....... Controls the balance of the left andright channels. Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.