NEC PlasmaSync 42XM4 PX-42XM4G User Manual

Contents

NEC PlasmaSync 42XM4 PX-42XM4G User Manual Manual pdf 31 page image

En-30Setting the power on modeThis function sets the input mode and the sound volumeat the time the power is switched on.Example: Setting the input mode to “VIDEO2”On “OPTION3 ” menu, select “PWR.ON MODE ”, thenpress the MENU/ENTER button.The “PWR.ON MODE ” screen appears.On “INPUT ” of “PWR.ON MODE ” menu, select“VIDEO2”.The available inputs depend on the setting of input.SEL. ADJ. RETURNEXITPWR. ON MODEINPUTVOLUME: VIDEO2: LASTInformation INPUT settingsLAST: Last mode (the input that was last selected atthe time the power was switched off).VIDEO1, 2, 3: VIDEO input mode.RGB1, 2, 3: RGB input mode.HD/DVD1, 2: HD/DVD input mode.HD/DVD2, 3: DVD input mode.MULTI: Multi screen mode.Follow the procedure used for PROGRAM TIMER. Seepage En-29.PICTURE IN PICTURE SIDE BY SIDE VOLUME settingsLAST: Last mode (the volume that was last selected atthe time the power was switched off).0 to 44: The level of sound volume.Enabling/disabling the front panel controlsThis function enables/disables the front panel controls.Example: Setting “ON”On “CONTROL LOCK” of “OPTION3” menu, select“ON”, then press the MENU/ENTER button.SEL. ADJ. RETURNOPTION 3 3 / 4PREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTREMOTE IDID NUMBERVIDEO WALLNEXT PAGE: ON: ON: OFF: ALL: ALLEXITInformation CONTROL LOCK settingsON: Disables the buttons on the front panel.OFF: Enables the buttons on the front panel.* Even when the CONTROL LOCK is set, the POWERswitch will not be locked.* This becomes effective when the on-screen menu goesout.Enabling/disabling remote control wirelesstransmissionThis function enables/disables remote control wirelesstransmission.Example: Setting “OFF”On “IR REMOTE” of “OPTION3” menu, select “OFF”, thenpress the MENU/ENTER button.SEL. ADJ. RETURNOPTION 3 3 / 4PREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTREMOTE IDID NUMBERVIDEO WALLNEXT PAGE: OFF: OFF: OFF: ALL: ALLEXITInformation IR REMOTE settingsON: Enables remote control wireless transmission.OFF: Disables remote control wireless transmission.Set “OFF” to avoid unwanted control from other remotecontrols.Loop Out settingWhen this feature is set to ON, the received signal will belooped out.Example: Setting “ON”On “LOOP OUT” of “OPTION3” menu, select “ON”.SEL. ADJ. RETURNOPTION 3 3 / 4PREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTREMOTE IDID NUMBERVIDEO WALLNEXT PAGE: OFF: ON: ON: ALL: ALLEXITInformation LOOP OUT settingsON: The received signal will be looped out via PC1terminal or VIDEO1 terminal.OFF: The received signal will not loop out.* Even if LOOP OUT is ON, signals won’t be sent out ifPOWER is being turned off. To connect another display...See page En-6. If the RGB/PC1 signal is present at the timethe power switched on...The RGB/PC1 input will be displayed regardless of thesetting of LOOP OUT.REMOTE ID settingSet the remote code to adapt the plasma monitor to theremote control.Example: Setting to “1”On the “REMOTE ID” of “OPTION3” menu, select “1”.SEL. ADJ. RETURNOPTION 3 3 / 4PREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTREMOTE IDID NUMBERVIDEO WALLNEXT PAGE: OFF: ON: OFF: 1: ALLEXITSEL. ADJ. RETURNPWR. ON MODEMULTI SCREEN SETTINGMULTI MODE: BOTTOM LEFTINPUT MODEMAINSUB: HD/DVD1: VIDEO1EXIT SEL. ADJ. RETURNPWR. ON MODEMULTI SCREEN SETTINGMULTI MODE: SIDE BY SIDE1INPUT MODELEFTRIGHT: HD/DVD1: VIDEO1EXIT