NEC PlasmaSync 42XP10 User Manual
Also see for 60XP10 - PlasmaSync - 60" Plasma Panel: SpecificationsSupplementary guideBrochureSpecificationsSpecifications
                                            | |
Contents
| 
EnglishEnglish-4CAUTIONCORRECT PLACEMENT AND ADJUSTMENT OFTHE MONITOR CAN REDUCE EYE, SHOULDER ANDNECK FATIGUE. CHECK THE FOLLOWING WHENPOSITIONING THE MONITOR:For optimum performance, allow 20 minutes for warm-up.Rest your eyes periodically by focusing on an object atleast 5 feet away. Blink often.Position the monitor at a 90 degree angle to windowsand other light sources to minimize glare andreflections.Clean the monitor surface with a lint-free, nonabrasivecloth. Avoid using any cleaning solution or glasscleaner.Adjust the monitor’s brightness and contrast controls toenhance readability.Get regular eye checkups.ErgonomicsTo realize the maximum ergonomic benefits, we recommendthe following:Use the preset Size and Position controls with standardsignals.Use the preset Color Setting.Do not use primary color blue on a dark background, asit is difficult to see and may produce eye fatigue due toinsufficient contrast.This equipment is not for use at video display workstation according to Bildscharb V.For more detailed information on setting up a healthy workenvironment, refer to the following document:American National Standard for Human FactorsEngineering of Visual Display Terminal WorkstationsANSI-HFS Standard No. 100-1988Published by:The Human Factors and Ergonomics SocietyP.O. Box 1369, Santa Monica, California 90406.••••••••••Cleaning the PanelWhen the panel becomes dusty or dirty, wipe gentlywith soft cloth.Do not rub the panel with coarse material.Do not apply pressure to the surface.Do not use OA cleaner. OA cleaner will causedeterioration or discolor the surface.Cleaning the CabinetUnplug the power supply.Gently wipe the cabinet with a soft cloth.To clean the cabinet, dampen the cloth with a neutraldetergent and water, wipe the cabinet and follow with adry cloth.NOTE:The surface of the cabinet is composed of manytypes of plastic.DO NOT clean with benzene thinner, alkalinedetergent, alcoholic system detergent, glass cleaner,wax, polish cleaner, soap powder, or insecticide.Rubber or vinyl should not be in contact withthe cabinet for an extended period of time. Thesetypes of fluids and materials can cause the paint todeteriorate, crack or peel.CLEANING THE VENT HOLESClean plasma ventilation areas using a vacuum cleanerwith a soft brush nozzle attachment.To ensure proper ventilation, cleaning the ventilationareas must be carried out monthly. More frequentcleaning may be necessary depending on theenvironment in which the plasma monitor is installed.•••••••••Recommended Use |
Related manuals for NEC 60XP10 - PlasmaSync - 60" Plasma Panel
manualsdatabase
Your AI-powered manual search engine