NEC S521-AVT Installation Manual

Also see for MultiSync S521: Specifications Installation and assembly Specifications Specifications Specifications

Contents

NEC S521-AVT Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.S521 Installation Guide52” LCD Display Rev 1.2www.necdisplay.com S521 Page 1 of 10Contents:Product Description and Notes Page 1Tilt Angle and Rotation Page 1Ventilation Requirements Page 2Display DimensionsFront, Top & Right Side Page 3Rear & Bottom Page 4Display Dimensions w/Optional Speakers and Stand Page 5Optional Table Top Stand Dimensions Page 6Optional Speaker Dimensions Page 7Dimensions with Optional Wall Mount Page 8Input Panels Page 9Control Codes Page 10Product DescriptionType: LCD Display Screen Surface: Anti-ReflectiveResolution: 1920 x 1080 Dimensions without stand: 49.4”(W) x 29.6”(H) x 5.5”(D)Aspect Ratio: 16:9 Dimensions with stand: 49.4”(W) x 31.0”(H) x 15.7”(D)FCC: Class B Weight without stand: 79.4 lbsPower Consumption: 290 W (typ) Weight with stand: 84.2 lbsBTU’s: 989.52 BTU/hourNOTES:• This document is intended to be used as a reference guide to supply useful information for a design or installation. It is notintended to be a step-by step procedure for installation.• Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs.• 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontallyto fill the screen using the menus (see “Aspect Modes” in menus and user manual).• Distances are in inches, for millimeters multiply by 25.4.• Distances may vary ±5%.Tilt Angle and RotationBelow are the maximum angles that the monitor can be tilted in the landscape position only.Landscape 20degMax. 20 deg