1.4 Installing the Expansion KSU(s)1.4.1 GeneralEach Expansion KSU is connected to the Main KSU individually. The EXIFB-C1 card and theMEMDB-C1 card must be installed in the Main KSU (1632M-A) . (Refer to Installing the ExpansionMemory Card (MEMDB-C1) on page 2-60 for MEMDB-C1 card)1.4.2 Unpacking (EXIFB-C1)Unpack the EXIFB-C1 and check it against physical damage.Table 2-3 EXIFB-C1 Packing ListItems List of Contents QTYEXIFB-C1 EXIFB-C1 PCB 11.4.3 Connectors Location (EXIFB-C1)J4J6J5J1J2J3Figure 2-11 Connectors of EXIFB-C1Table 2-4 Connectors of EXIFB-C1No. Connectors Connectable DevicesJ1 Expansion Connector Expansion KSU 3J2 Expansion Connector Expansion KSU 2J3 Expansion Connector Expansion KSU 1J4 Mother PCB J1 connector on 408M-A1J5, J6 Debug Purpose (Not used) -1.4.4 Installing the EXIFB-C1 PCBDo Not Power on until all installations have been completed.1. Turn off the system power and disconnect the AC cord from KSU.ISSUE 3.0 SL1000Hardware Manual 2-9
