110VAC 120VAC 220VAC 230VAC 240VACGround Requirement No.14 AWG Copper WireFeeding Voltage SLT: 20 mA/ -27 VAC Input I Main KSU =1.16 A3 KSU Total =3.48 AMain KSU =1.08 A3 KSU Total =3.24 AMain KSU =0.70 A3 KSU Total =2.10 AMain KSU =0.67 A3 KSU Total =2.01 AMain KSU =0.65 A3 KSU Total =1.95 AKWh Main KSU =0.128 KWh3 KSU Total=0.384 KWhMain KSU =0.130 KWh3 KSU Total=0.390 KWhMain KSU =0.154 KWh3 KSU Total=0.462 KWhMain KSU =0.154 KWh3 KSU Total=0.462 KWhMain KSU =0.156 KWh3 KSU Total=0.468 KWhBTU (KWh x 3413) Main KSU =437 BTU3 KSU Total=1311 BTUMain KSU =444 BTU3 KSU Total=1332 BTUMain KSU =526 BTU3 KSU Total=1578 BTUMain KSU =526 BTU3 KSU Total=1578 BTUMain KSU =532 BTU3 KSU Total=1596 BTU1.5.3 AC Power CordThe AC power switch and AC power inlet are located at the left side of each KSU. The AC power cordis connected to the AC inlet and the commercial AC power socket.Do not plug-in AC power cord if the KSU Cover is removed.Before connecting the AC power cord, make sure:• The power switch at the left side of each KSU is turned OFF.• The power switch at the commercial AC power socket is turned OFF.• The AC plug fits the commercial AC power socket. The plug adapter is neces-sary if it does not fit.• Each KSU must have its own commercial AC power socket.• DO NOT POWER ON until all KSU installation has been completed.1.6 Trunk/Extension Cabling1.6.1 GeneralThe system provides RJ61 modular jacks for analog trunk and analog/digital extension connections.1.6.2 Precautions for Cabling• Do not wire the cable with an AC cable, computer, etc.ConnectAC Power Cord KSUTo CommercialAC Power Socket“B” typeFigure 2-20 AC Power CordISSUE 1.0 SL1100Hardware Manual 2-13
