5.2 Install the IP Multiline Telephone (IP4WW-24TIXH-C1 TEL)5.2.1 System ConnectionThe IP Multiline Telephone is connected via HUB.5.2.2 Installing the IP Multiline Telephone1. Connect the LAN Network 10Base-T/100Base-TX cable to the LAN(=) connector.2. If the Power feeding is used by AC-[ ] UNIT, plug the AC-[ ] UNIT cable to the DC input jack on theIP Multiline Telephone Base.3. The IP Multiline Telephone has a Switching HUB to connect a PC to the LAN Network. Connectthe 10Base-T/100Base-TX straight cable used for connection to the PC to the PC(X) connectorand to the PC.5.2.3 Applying Power to the IP Multiline TelephoneIP Multiline Telephone (IP4WW-24TIXH-C1) supports two different power sources for the Telephone.• AC-2R UNIT/AC-L UNITLAN Cable(10BASE-T/100BASE-TX)IP Multiline TelephoneLAN(=) ConnectorPC (X)ConnectorFerrite CoreVOIPDB-C1board (CN1)KSUCommercial PowerCommercial PowerPCAC-[ ]UNITHubExit HelpFlashClear/BackABCGHI JKL MNOPQRS TUV WXYZDEFHoldSpeaker1 2 34 5 67 8 90 㧏Mute DNDTransferFigure 2-98 IP Multiline Telephone ConnectionPC(X) LAN(=)< Bottom view>PC(X) LAN(=)Figure 2-99 IP Multiline Telephone ConnectorsISSUE 1.0SL1100Installation2-62
