NEC SigmaBlade N8406-022 User Manual

Contents

NEC SigmaBlade N8406-022 User Manual Manual pdf 47 page image

(English)25LEDSTATUS LEDThe STATUS LED goes on green when the Switch Module operates normally. When the LED is lit or flashing inamber, it indicates that the Switch Module has failed. The following table lists indications of the STATUS LED,descriptions, and actions to take. If an error occurs, contact your service representative.STATUS LED Description ActionOn (Green) The Switch Module is operatingnormally.-Off The power is turned off. Turn on the power.The following errors have beendetected.- Abnormal temperature- Processor error or othercomponents errorWhen installed in the Blade Enclosure (6U), anerror message is displayed on theSIGMABLADE monitor.Refer to the User’s Guide of the EnclosureManager Card.Flash (Amber)Switch Module interfacemismatchWhen installed in the Blade Enclosure (6U),“SWMn Ifmiss Alm” (n: slot number) is displayedon the SIGMABLADE monitor. See page 28“Connection with CPU Blade”, and make surethe location of the Mezzanine Card in the CPUBlade and the Switch Module.Refer to the User’s Guide of the BladeEnclosure.ID LEDThe ID LED is intended to identify a specific Switch Module in the Blade Enclosure when more than one SwitchModules are installed. Making this LED being lit can help the maintenance work to identify the faulty device.When the recognized command is received from the management software such as NEC ESMPRO Manager, theLED goes on or flashes in blue.ID LED DescriptionOn or Flash in blue Management software has specified the Switch Module.Off Other than the above