N — User’s GuideH THE 4200Na Startup Page, you can install aSuperScript 4200N CD and beginf setup available for SuperScript: Easy/Local, Custom/Networktor.use the Easy/Local setup. This setupic printing tools for your operatingfor Windows 95/98 andClientsipt 4200N CD into the CD-ROM drive.aunch automatically.elect the Easy/Local installationext .ng to the selections displayed in theinstallation is complete.for Windows 3.1x Clientsipt 4200N CD into the CD-ROM drive.File Manager to view the contents of0N CD.\PS directory.tup.exe to begin the install.ng to the selections displayed in theinstallation is complete.ent fr om Your Applicationhe print command of the applicationcument.you wish to print.he File menu. The Print dialog boxou want in the Print dialog box,including the number of copies and page range.4. When the options are selected, click OK to print thedocument.Instructions for setup and printing from a Macintosh printclient are on page 41.QUICK WEB PRINTING WITH THE4200N NETWORK PRINTERThe fastest way to begin printing over the network is to usePrintAgent software and a web browser. This section showshow to set up PrintAgent Remote Printing.To use Remote Printing, you must have on your computer• Microsoft Internet Explorer 4.01 SP1• The Windows 95/98 operating systemSetting the Printer’s IP AddressThere are several ways to do this. The steps below show howto use the Operator Panel to set your printer’s IP Address.1. Press the Online button of the Operator Panel. OFFLINEappears on the display.2. Press the Menu button to enter menu mode. CONTROLappears on the display.3. Press the Next button until COMMUNICATIONS appearson the display, and press the Select button.4. Press the Next button until NETWORK appears on thedisplay, and press the Select button.5. Press the Next button until TCP/IP appears on the display,and press the Select button.6. Press the Next button until NET ADDRESS appears on thedisplay, and press the Select button.7. Use the Operator Panel buttons to set values for each ofthe 12 digits in this manner.First press Next to set the cursor to the first digit.For the first digit, press Select to increment to the correctvalue. Then press Next to move to the next digit andpress Select to increment to its correct value. Continueuntil all twelve digits are set. When the final digit is set,press Next to confirm the Net Address you set and thenpress Select .