NEC SuperScript 4200N Online User's Manual

Also see for SuperScript 4200N: Network guide

Contents

NEC SuperScript 4200N Online User's Manual Manual pdf 39 page image

31RIVERSre that translates your computere printer can read and print out. Youver software to change printer andanage fonts. First, you need toriver for your system.provides the following printerow 3.1xows 95/98ows NT 4.0OS (on EtherTalk networks)how to install, access, and use theseprinter settings. For definitions ofilable on printer drivers, seeu can also use the online Helpiver.also provides software fore printer on NetWare, TCP/IP, andwork setup is described inting, in most cases, requires theinter drivers.etup available for SuperScriptasy/Local, Custom/Networkr. This chapter provides instructionssetup. This setup quickly installsr your operating system. This isnected to a SuperScript 4200N fromp options are described in moreColor Control OptionsDuring the PostScript 3 for Windows 95/98 driverinstallation, you have the option of installing a driver usingMicrosoft Image Color Matching (ICM) technology or adriver using NEC’s color matching method. The driver usingNEC’s color matching method is the default driver.The ICM based driver calibrates the colors with thoseactually seen on the print client’s monitor. The NEC baseddriver calibrates the colors with those described by the NECColor Table located inside the printer.The choice can be made when the Select Components dialogbox appears during installation. Simply highlight the PrinterDrivers Win95 item, then click Change to open the SelectSubcomponents dialog box. The ICM based driver can beselected there. However, when the ICM based driver isinstalled, you can still choose between ICM based or NEC’scolor matching printing methods from the Color Controloptions located in the Graphics tab of the driver.WINDOWS 95/98To install the Windows 95/98 printer driver from theSuperScript 4200N CD:1. Insert the SuperScript 4200N CD into the CD-ROM drive.2. The Installer will launch automatically.3. Following the instructions displayed on the computermonitor.4. At the Setup Type window, select the Easy/Localinstallation option. At this point, you may click Changeif you want to install the ICM based driver describedabove, otherwise, click Next to continue installing thedefault driver.5. When installation is complete, restart Windows.note: Pure binary data is not supported by PostScriptwhen a computer is locally connected (directly connectedusing a parallel cable) to the printer. To assurecommunications between the computer and the printer,go to the PostScript tab of the driver, click Advanced toopen the PostScript Options dialog box, then assure thatthe Pure Binary Data radio button is clear.