NEC USB User Manual

Contents

NEC USB User Manual Manual pdf 6 page image

Quick StartHow to attach IntelliBase™ USB Hub and Audio to yourMultiSync® brand monitorTHE INTELLIBASE USB HUB AND AUDIO WILL ONLY WORK WITH THEMULTISYNC BRAND MONITORS LISTED BELOW. DO NOT ATTEMPT TOCONNECT THE INTELLIBASE WITH ANY OTHER MONITOR BRANDS.MAKE SURE THE MONITOR IS DISCONNECTED FROM THE SYSTEM ANDIS UNPLUGGED FROM THE WALL OUTLET BEFORE ANY WORK IS DONEON THE MONITOR.FOR ALL 21” MULTISYNC MONITORSIT IS ADVISED THAT TWO PEOPLE ARE INVOLVED DURING THE ENTIREINSTALLATION PROCESS. ONCE THE INTELLIBASE HAS BEEN INSTALLEDONTO YOUR 21” MONITOR, DO NOT ATTEMPT TO ADJUST THE TILT OF THEMONITOR FROM THE BACK OF THE MONITOR UNIT. ONLY ADJUST THE TILTFROM THE FRONT OF THE UNIT BY HOLDING ONTO THE LEFT AND RIGHTSIDE OF THE MONITOR, TILTING EITHER UPWARDS OR DOWNWARDS. DONOT TILT THE MONITOR DOWNWARDS MORE THAN 5 DEGREES OR FORCETHE MONITOR PAST THE FIRST STOP, AS THE MONITOR MAY BECOMEUNSTABLE, CAUSING POSSIBLE INJURY.If you have any questions or comments, please contact NEC at 1-800-632-4662To attach the IntelliBase to your MultiSync brand monitor, the original basemust first be removed. Depending on the model of your MultiSync brandmonitor, the removal procedure of the original base and the attachment ofthe IntelliBase will vary. Locate the model name (located in the lower rightcorner of your monitor’s bezel) of your MultiSync brand monitor in the tablebelow. Follow the removal procedure to detach the original base from yourmonitor using the diagrams on the following pages and attach the IntelliBaseto your monitor.2MultiSync Monitor Model Names Original Monitor BaseRemoval and IntelliBaseInstallation InstructionsMultiSync 50, MultiSync 70, XV15 andXV15+MultiSync XE15, XE17, XP15, XP17, XV17,XV17+, A500, A500+, A700, A700+,A900, E500, E700, E900, E900+, M500,M700 and P750MultiSync XE21, XP21, E1100, E1100+,P1150 and P1250+Page 3Page 5Page 7203 Eng Fr Cndn manual 12/21/98 11:19 AM Page 6