NEC UX5000 Easy Setup Manual

Also see for UX5000: User guide User guide Feature handbook Hardware manual Hardware manual

Contents

NEC UX5000 Easy Setup Manual Manual pdf 35 page image

Chapter 2 - MH240 SetupChapter 2 2 - 112.1.1.7 SIP Settings for the MH240The following program steps are made from the Config menu (see Place the MH240 in ConfigMode (page 2-2)), then enter the SIP Setting menu:1. Go to “Config” menu. (See “PLACE THE MH240 IN CONFIG MODE”)2. Press 2 (SIP Setting) to view Profile Select menu.3. Press ▲▼ to select a profile you want to edit and then press the “OK” soft key.Follow the steps in order to define the each of the required options for the MH240 setup.2.1.1.7.1 Set the Profile Name:Factory Default: 1.NEC-SETUP (2 to 9 are blank)1. Press 1 (Profile Name) to go to the Profile Name edit screen.2. Edit the Profile Name corresponding with profile created on the WL1700 AP andthen press the “OK” soft key.3. Continue with the next feature or press the Power/On-Hook key and 2 to save.Pressing the Power/On-Hook key and 1 will cancel any entered changes.2.1.1.7.2 Set the SIP Proxy:Factory Default: 172.16.0.10 (1.NEC-SETUP)1. Press 2 (SIP Proxy) to go to the SIP Proxy edit screen.2. Enter the IP address of the UX5000 as configured in Program 10-12-09 orprovided by the computer management department [SIP Proxy (IP Address orFQDN)] and then press the “OK” soft key.3. Continue with the next feature or press the Power/On-Hook key and 2 to save.Pressing the Power/On-Hook key and 1 will cancel any entered changes.2.1.1.7.3 Set the SIP Port:Factory Default: 50701. Press 3 (SIP Port) to go to the SIP Port edit screen.2. Edit the SIP Port (ex: 5070) and then press the “OK” soft key.3. Continue with the next feature or press the Power/On-Hook key and 2 to save.Pressing the Power/On-Hook key and 1 will cancel any entered changes.