Secure Set RelocationPage - 134Secure Set RelocationNeed to swap your terminal's programming with another terminal? Using Secure Set Relocation, you canswap most of your terminal's programming. However, user-defined programming, such as Call Forward setup, Selectable Display Messaging, etc.) will not be swapped. In addition, the following items are cleared:Camp On, Last Number Redial, Saved Number Clear, Incoming History, and Common Cancelling of Ser-vice Codes. This feature will not work for virtual extensions.To swap your extension data using Secure Set Relocation:The extensions to be swapped must be idle while the swap is performed, or an "Invalid" errormessage will be received.1. From one of the terminals which is to be swapped, dial the Extension Data Swap service code.Ask your Communications Manager for this code.If a warning tone or error message is heard, the password for this feature is not set - check withyour Communications Manager.2. Dial the 4 digit password.If an incorrect password is entered, a warning tone is heard.3. Dial the extension number which is to be swapped.A confirmation tone is heard if the swap is completed.If it is not possible to swap the extension data, a warning tone is heard.
