NEC Univerge MH250 User Manual
Also see for Univerge MH250: User guideUser guide
                                                                                                                | |
Contents
| 
6• HOW TO CHARGE THE BATTERYBe sure to charge the battery when using the phone forthe first time. Use one of the following:• Cradle• PC via USB cable• AC adapter (direct connection)By using the Cradle:The phone can be charged by using the cradle. You canalso charge the battery by inserting the battery packalone to the slot on the cradle. This is useful when youhave a spare battery.(1) Insert the AC adapter plug into the jack in thebottom of the cradle.(2) Plug in the AC adapter to an appropriate outlet.(3) Place the phone and/or the spare battery pack asshown below. When placing a battery pack into theslot, insert it so that the label may face downward.Note: Face the label of the battery pack downwardwhen inserting the battery pack.(4) Info LED lights red and the LED on the cradle alsolights red, indicating the battery is being charged.(5) Info LED turns off when the phone battery is fullycharged.(6) The LED on the cradle lights green when both thephone battery and the spare battery are fullycharged if a spare battery is also placed on thecradle. If not, the LED light green when the phonebattery is fully charged.connectorInfo LEDLEDspare battery (option)AC AdapterAC Adapter CableAC outletcradle (Battery Charger)used for: call indicationcharger statusUsed for indicating charge status.An empty battery pack can be fully charged inabout three hours.If any abnormality is found to the battery, theLED on the cradle starts flashing. In this case,please contact your network administrator.TIP01:AbcDefg02:HigkLmn03:OpqrStuTIP01:AbcDefg02:HigkLmn03:OpqrStu |
Related manuals for NEC Univerge MH250
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine