NEC Univerge MH250 User Manual

Also see for Univerge MH250: User guide User guide

Contents

NEC Univerge MH250 User Manual Manual pdf 33 page image

15• TO USE CALL PARKYou can park the ongoing call and replace the handset.The opposite party is placed in hold. You can retrievethe held call from the original phone or other phone byusing access code.To Park a Call:- Press key during a call in progress.- Enter CALL PARK access code and the receive Ser-vice Set Tone.- Press key.To Retrieve the Call from the Original Phone- Enter CALL PARK - LOCAL RETRIEVAL accesscode and then press key.To Retrieve the Call from Other Phone:- Enter CALL PARK - REMOTE RETRIEVALaccess code (ex. 11) and the station number of theoriginal phone (ex. 5111) in succession (ex. 11 +5111).- Press key and then connection is established.• TO USE CALL BACKYou can set CALL BACK if the attempted callencounters a busy condition.- Press key and then dial CALL BACK accesscode when the called party is busy.- Receive Service Set Tone and then press key.(Please wait a while until the called party becomesidle)- When the called party becomes idle, your phonerings.- Press key and then receive Ring Back Tone(The opposite party is ringing).- Connection is established when the opposite partyanswers.• TO USE CALL WAITINGThis feature allows the phone user who has an ongoingcall to receive a second incoming call.To Activate CALL WAITING - ORIGINATING:- Dial a phone number - receive Busy Tone.- Press key and then dial CALL WAITINGaccess code.- Receive Special Ring Back Tone.- CALL WAITING tone is sent to the busy station.To Answer the Waiting Call- CALL WAITING TONE is heard.- Press key and then the Waiting Call is auto-matically connected by placing the opposite party inhold.- By pressing key you can switch the callbetween the original party and the new party.POWERPOWER