2. Installation and ConnectionsConnecting the Supplied Power CableConnect the supplied power cable to the projector.First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other plugof the supplied power cable in the wall outlet.To wall outletThe projector will go into standbymode. When in standby mode, thePOWER indicator will light orangeand the STATUS indicator will lightGREEN WHEN ;./2-!,= IS SELECTED FOR ;34!.$"9 -/$%= Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if theAC power supply is disconnected during normal projector operation.Use caution when picking up the projector.Make sure that the prongs are fully inserted into both thepower plug and the wall outlet.Downloaded From projector-manual.com NEC Manuals
