NEC V300X User Manual
Also see for V230: User manualQuick setup guideQuick setup guideQuick setup guideUser manual
                                                                                                   | |
Contents
| 
3. Projecting an Image (Basic Operation)7 Turning off the Projector1. first, press the (POWer) button on the projectorcabinet or the POWer Off button on the remote con-trol.The [POWER OFF / ARE YOU SURE? /CARBON SAV-INGS- SESSION X.XXX[g-CO2]] message will appear.2. secondly, press the enter button or press the(POWer) or the POWer Off button again.The lamp will turn off and the projector will go into standbymode. When in standby mode, the POWER indicator willlight orange and the STATUS indicator will light green when[NORMAL] is selected for [STANDBY MODE].Immediately after turning on the projector and displaying animage, you cannot turn off the projector for 60 seconds.3. finally, unplug the power cable.The POWER indicator will go out.Parts of the projector may become temporarily heated if the AC power supply is disconnected either during normalprojector operation or during cooling fan operation. Use caution when picking up the projector.Power On StandbySteady green light Steady orange lightNOTE:• Do not turn off the power for 60 seconds immediately after turning it on and displaying an image.• Do not disconnect the AC power supply to the projector within 10 seconds of making adjustment or setting changes and closingthe menu. Doing so can cause loss of adjustments and settings.Downloaded From projector-manual.com NEC Manuals |
Related manuals for NEC V230
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine