2-24 Setup and OperationTable 2-6 Setup ParametersPARAMETERDEFAULTSETTINGALTERNATESETTINGSSerial TimeoutStandby TimeoutSuspend ModeAuto SuspendTimeoutAuto Save to FileSuspend WarningTonePCMCIA PowerVideo HighlightModem Ring ResumeWake from Suspend at:On4 min.Suspend10 min.OnOnOnStandardOff0:00:00Off1/2/4/6/8/12/15 min/OffSave to File/Suspend Only5/10/15/20/25/30/34 min/OffOffOffOffFullOn* Visible only when notebook is docked.** For Windows 95, the initial setting is “Reconfigurable.” Selecting “Select Default Values” in theExit menu sets these settings to the defaults listed here. Do not use “Reconfigurable” with non-plug andplay systems, (such as Windows for Workgroups or DOS). Doing so disables the device.+ Can be in the docking station or VersaBay II.Parameter DescriptionsRead the following for an understanding of each parameter's function.Time/DateUse this option to set the time and date. The settings remain in memory even after you turnoff system power.To set the time, enter the current hour, minute, and second in hh:mm:ss, 24-hour format.Use the Tab key to move from field to field. For example, type 13:30:00, tabbing from fieldto field for 1:30 p.m.To set the date, enter the current day, month, and year in mm/dd/yyyy format.NOTE: When setting the time and date, enterpreceding zeroes. For example, to enter 9:20a.m. and February 4, 1996, type 09:20:00 and02/04/1996.DrivesThe Drives option lets you check or change parameters for your diskette drive, hard diskdrive, the CD-ROM reader and docking station hard drives.
