NEC VERSA LX Service And Reference Manual

Also see for Versa LX: Important information Manual Important information Important information Manual

Contents

NEC VERSA LX Service And Reference Manual Manual pdf 73 page image

Disassembly and Reassembly 3-17Microphone1. Disconnect the microphone cable at connector CP11.2. Remove the microphone and cable by gently pulling from the LCDassembly.LED Board and LED Board Cable1. Remove two screws and disconnect the cable from connector CP12 on theLED board.2. Lift the LED board to remove.3. Remove one screw to release the LED cable and anchor from the LCD panelassembly.PC Card Assembly, CMOS Battery, Buzzer, andAudio BoardThe PC card assembly, CMOS battery, buzzer, and audio board may beremoved and replaced individually if need be, but all must be removed tocontinue the disassembly sequences to the next level.PC Card Assembly1. Remove three screws (A).2. Lift and disconnect the PC card assembly from connector P14 on the mainboard. Start by lifting on the right side of the PC card assembly and slide tothe right.A – PC Card Assembly Screws