NEC VT570 User Manual

Also see for VT47 Series: Control commands Command guide Command guide Control commands Specifications

Contents

NEC VT570 User Manual Manual pdf 28 page image

212. Installation and ConnectionsAUDIO INL RAUDIO OUTL RVIDEO OUTS-VIDEOVIDEOAC INAUDIO OUTMONITOR OUTPC CONTROLAUDIOS-VIDEO INCOMPUTER 2 INVIDEO IN COMPUTER 1 INAUDIOL/MONO RAUDIOL/MONO RS-VIDEO INVIDEO IN AUDIOAUDIOConnecting Your VCR or Laser Disc PlayerS-Video cable (not supplied)Video cable (not supplied)VCR/ Laser disc playerAudio equipmentAudio cable (not supplied)Use an RCA or S-Video cable (not provided) to connect the video and use RCA cables (not provided) to connectthe audio from your VCR, laser disc player or document camera to your projector.To make these connections, simply:1. Turn off the power to the projector and VCR, laser disc player or document camera.2. Connect one end of an RCA cable to the video output (or one end of an S-Video cable to the S-Video outputconnector) on the back of your VCR or laser disc player, connect the other end to the appropriate video inputon your projector. Connect one end of a pair RCA cables (not supplied) to the audio output on the back of yourVCR or laser disc player, connect the other end to your audio equipment or to the appropriate audio input onthe projector.Be careful to keep the right and left channel connections correct for stereo sound.NOTE: The AUDIO IN L/MONO and R jacks (RCA) are shared between the Video and S-Video inputs on VT47.3. Connect the supplied power cable. See page 22.4. Turn on the projector and the VCR or laser disc player.NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video outputrequirements.NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind viaa scan converter.