27 Turning off the ProjectorTo turn off the projector:3. Projecting an Image (Basic Operation)SELECTMENUENTEREXITLAMPSTATUSPOWERON/STAND BY AUTO ADJ.SOURCE ENTER EXITMENUUPMAGNIFY PAGEOFFPOWERONPIC-MUTEDOWN1. First, press the POWER (ON/STAND BY) button onthe projector cabinet or the POWER OFF button onthe remote control. The [Power Off / Are you sure?]message will appear.2. Secondly, press the ENTER button or press thePOWER (ON/STAND BY) or the POWER OFF buttonagain.The power indicator will glow orange. After theprojector turns off, the cooling fans keep operatingfor 30 seconds (Cool-down time).Immediately after turning on the projector anddisplaying an image, you cannot turn off theprojector for 60 seconds.3. Finally, turn off the Main Power switch. The powerindicator will go out.TIP: The main power of the projector can be turned off by pressingthe main power switch or by unplugging the power cable evenduring the cool down period after the projector is turned off.NOTE: Do not turn off the main power within 10 seconds of makingadjustment or setting changes and closing the menu.Doing so can cause loss of adjustments and settings.Power On Fan running StandbySteady green light Blinkingorange lightSteady orangelightPOWERSTATUSLAMPPOWERPOWERSTATUSLAMPSTATUSLAMPMENUSELECTLAMPSTATUSPOWERON/STAND BY SOURCEAUTO ADJ.ENTEREXITFOCUSZOOMCAUTION:Parts of the projector will become heated during operation. Use caution when picking up the projector immediatelyafter it has been operating.CAUTION:• The projector cannot be turned off for 60 seconds after the lamp is turned on and while the POWER indicator isblinking green. Doing so could cause premature lamp failure.• Do not turn off the AC power by pressing the main power switch or by unplugging the power cable when theprojector is powered on. Doing so can cause damage to the projector.Downloaded From projector-manual.com NEC Manuals