NEC VT580 User Manual

Also see for VT48 Series: Control commands Command guide Command guide Control commands User manual

Contents

NEC VT580 User Manual Manual pdf 49 page image

415. Using On-Screen MenuNormalStandard4:3 AspectWhen 16:9 is selected fromthe source (i.e. DVD player),the following selections willdisplay:Normal16:9 image displayedin 4:3 modeWide ZoomCinemaNativeLeft and rightstretchedLeft and rightstretchedWide ZoomCinemaNativeLeft and rightstretchedLeft and right stretched todisplay the true aspectWhen 4:3 is selected fromthe source (i.e. DVD player),the following selections willdisplay:Adjusting White Balance [White Balance]This allows you to adjust the white balance. Brightness for each color (RGB) is used to adjust the black level of thescreen; Contrast for each color (RGB) to adjust the white level of the screen.Adjusting Brightness, Contrast, Sharpness, Color and HueYou can adjust brightness, contrast, sharpness, color and hue.TIP: When one of [Brightness],[ Contrast],[ Sharpness],[ Color] or [Hue] is highlighted, pressing the ENTER button will display itsslide bar for adjustment.Brightness ............. Adjusts the brightness level or the black level of the image.Contrast ................ Adjusts the intensity of the image according to the incoming signal (White level of the image).Sharpness ............. Controls the detail of the image for Video (not valid for RGB).Color ..................... Increases or decreases the color saturation level (not valid for RGB).Hue ........................ Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is onlyvalid for Video and Component inputs (not valid for RGB).ResetThe settings and adjustments for [Picture] will be returned to the factory settings with the exception of the following;Preset numbers and [Reference] within the [Preset] screen.The settings and adjustments under [Detail Settings] within the [Preset] screen that are not currently selected will not be reset.Menu Descriptions & Functions [Image Options]Selecting Aspect Ratio [Aspect Ratio]Aspect Ratio allows you to select the best Aspect mode to display your source image.You can also display the Aspect Ratio menu by pressing the ASPECT button on the remote control.Native (RGB only): Turns off the scaling feature. The projector displays the current image in its true resolution.Downloaded From projector-manual.com NEC Manuals