NEC VT670 User Manual
Also see for VT47 Series: Control commandsCommand guideCommand guideControl commandsSpecifications
                                                                                   | |
Contents
| 
32 Turning off the ProjectorTo turn off the projector:3. Projecting an Image (Basic Operation)LAMPSTATUSPOWER VIDEOAUTOADJ.S-VIDEO COMPUTER-1 COMPUTER-2ON/STAND BYSELECTPOWERSOURCE PIC-MUTEASPECTSELECTL-CLICKENTER EXITMENUUPMAGNIFY PAGEOFFPOWERONPIC-MUTEDOWNR-CLICKFirst, press the POWER (ON/STAND BY) button on theprojector cabinet or the POWER OFF button (the POWERbutton on VT570/VT47) on the remote control. The “PowerOff / Are you sure?” message will appear.CAUTIONDo not unplug the power cable from the wall outlet or do not turn offthe main power under any one of the following circumstances. Doingso can cause damage to the projector:• While the Hour Glass icon appears.• While the cooling fans are running. (The cooling fans continue towork for 30 seconds after the projector is turned off).AC INZOOMFOCUS After UsePreparation: Make sure that the projector is turned off.1. Unplug the power cable.2. Disconnect any other cables.3. Retract adjustable tilt feet if extended.4. Cover the lens with the lens cap.5. Put the projector and its accessories in the supplied soft carrying case.Secondly, press the ENTER button or press the POWER(ON/STAND BY), the POWER OFF or the POWER buttonagain.The power indicator will glow orange. After the projectorturns off, the cooling fans keep operating for 30 seconds(Cooling-off time).Immediately after turning on the projector and displayingan image, you cannot turn off the projector for 60 sec-onds.Finally, turn off the Main Power switch. The power indica-tor will go out.VT670/VT470 VT570/VT47POWERSTATUSLAMPPOWERPOWERSTATUSLAMPSTATUSLAMPPower On Fan running StandbySteady green light Blinkingorange lightSteady orangelight |
Related manuals for NEC VT47 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine