NEC VT670 User Manual
Also see for VT47 Series: Control commandsCommand guideCommand guideControl commandsSpecifications
                                                                                   | |
Contents
| 
495. Using On-Screen Menu[Phase] (available for RGB and HDTV signals only)Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evidentwhen part of your image appears to be shimmering.)Use “Phase” only after the “Clock” is complete.This adjustment is made automatically when the Auto Adjust is turned on.Selecting Communication Speed [Communication Speed]This feature sets the baud rate of the PC Control port (DIN 8 Pin). It supports data rates from 4800 to 19200 bps.The default is 19200 bps.Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud ratemay be recommended for long cable runs). Menu Descriptions & Functions [Information]Displays the status of the current signal, remaining lamp (%), lamp/filter/projector usage time (hours) and versioninformation. The Information has two pages. The Information included is as follows:[Page 1]Remaining Lamp Time (%)*Lamp Hour Meter (H)Filter UsageProjector Usage* The progress indicator shows the percentage of remaining bulb life. The value informs you of the amount oflamp usage. When the remaining lamp time reaches 0, the Remaining Lamp Time bar indicator changesfrom 0% to 100 Hours and starts counting down.If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the lampmode is set to Normal or Eco.BIOS VersionFirmware VersionData Version[Page 2]Source IndexHorizontal FrequencyVertical FrequencySync PolaritySignal TypeVideo TypeSync TypeInterlace |
Related manuals for NEC VT47 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine