NDA-24230 Issue 2.0 Page 8-11VisuaLink 128/384 User Guide Chapter 88.7 Send a Snapshot During a meeting, you may want to distribute copies of a diagram or pass aroundan illustration so that everyone can take a closer look at what you are discussing.You can do the same in a videoconference by sending a snapshot. A snapshot is apicture like an electric photograph that you can send to the far-end.8.7.1 Send a snapshot¬ Press either the MAIN CAM or CAM 2 button to view the image from thecamera.Á Adjust the image using the CAMERA CONTROL and/or ZOOM button;keep doing this until the camera is showing the image exactly the way youwant it. Press SEND button in the SNAPSHOT area. The snapshot appears on thefar-end screen and on your screen and whatever you were viewing at the far-end appears in your PIP. Whenever a snapshot appears, you also see themessage STILL at the upper left corner of the screen. This is your indicationthat a STILL is being shown in the monitor.CAM 2MAIN CAMZOOMCAMERACONTROLIrvingSending a Snap Shot.Local control: Camera 2SENDRECEIVE
